T&E Tools Screw Extractor / Guide / Drill Set

Designed to remove broken fasteners without breaking or jamming. Will turn broken fasteners out while permitting the highest torque without expansion. Made from C4150 alloy steel. Supplied in tough PVC case. For screws that are really seized up first spray with a solvent or heat up. Extractor pins are manufactured from high grade materials and should be kept straight and not heated.

Instructions for use:

• 1. Carefully locate drill and guide bushing and engage ground HSS drill bit. For sizes of 7mm and up, pre-drill
• 2. Drive in the extractor pin (no deformation of drilled part)
• 3. Put on the extractor nut and unscrew using a wrench
• 4. Use special guide bushes when drilling sunken or protruding broken screws

Chart for using screw extractors:

• Bolt Size M5 Drill Size 3.2 mm Extractor Pin Size 1 Nut Size Size 1 Hex Size Wr. 10 mm
• Bolt Size M6 Drill Size 3.2 mm Extractor Pin Size 1 Nut Size Size 1 Hex Size Wr. 10 mm
• Bolt Size M7 Pre-Drill Size 3.2 mm Drill Size 4.8 mm Extractor Pin Size 2 Nut Size Size 2 Hex Size Wr. 11 mm
• Bolt Size M8 Pre-Drill Size 3.2 mm Drill Size 4.8 mm Extractor Pin Size 2 Nut Size Size 2 Hex Size Wr. 11 mm
• Bolt Size M9 Pre-Drill Size 4.8 mm Drill Size 6.4 mm Extractor Pin Size 3 Nut Size Size 3 Hex Size Wr. 13 mm
• Bolt Size M10 Pre-Drill Size 4.8 mm Drill Size 6.4 mm Extractor Pin Size 3 Nut Size Size 3 Hex Size Wr. 13 mm
• Bolt Size M12 Pre-Drill Size 4.8 mm Drill Size 8 mm Extractor Pin Size 4 Nut Size Size 4 Hex Size Wr. 14 mm
• Bolt Size M14 Pre-Drill Size 6.4 mm Drill Size 8.7 mm Extractor Pin Size 5 Nut Size Size 5 Hex Size Wr. 17 mm
• Bolt Size M16 Pre-Drill Size 6.4 mm Drill Size 8.7 mm Extractor Pin Size 5 Nut Size Size 5 Hex Size Wr. 17 mm

About T&E:

T&E Tools is an Australian-owned and operated company that takes pride in producing high-quality professional hand tools, specialty service tools, and workshop equipment.